Step-By-Step Guide: How to Change a Tire Safely on the Road
Photo credit: https://www.plymouthrock.com/wp-content/uploads/2023/03/hero-resc-drive-on-spare-tire-640x350-1.jpg
Dealing with a flat tire far from a garage can be frustrating, but with this step-by-step guide, you can safely change a tire while off the road:
Move to a safe, level area away from traffic.
Ensure the surface is flat to prevent the car from rolling. 2. Turn on Hazard Lights:
Turn on your hazard lights to alert other drivers.
Use road flares or reflective triangles if available. 3. Apply the Parking Brake:
Secure the vehicle by applying the parking brake.
This will prevent the car from moving during the tire change. Loosen the lug nuts with a tire iron.
Tip: Loosen each lug nut but don't remove them completely yet.
It's easier to loosen them while the tire is on the ground. 5. Place the Jack and Raise the Car:
Place the jack under the car frame near the tire you're changing.
Check your manual for specific jack points.
Carefully raise the car until the tire is off the ground. Unscrew the lug nuts completely.
Remove the flat tire, keeping the lug nuts handy. Align the spare tire's holes with the wheel studs.
Mount the tire in place and hand-tighten the lug nuts. Carefully lower the car back to the ground.
Remove the jack and tighten the lug nuts in a crisscross pattern. Use a tire gauge to check the spare tire's pressure.
Maintain the recommended tire pressure. Place the flat tire and tools back in the trunk securely. Head to a tire shop to repair or replace the flat tire.
Temporary spares aren't meant for long-term use.
Stay safe and follow these steps to ensure a smooth tire change even when you're off the road.
| POLL |
6 MAI | 2 ANSWERS Step-By-Step Guide: How to Change a Tire Safely on the Road How confident are you in changing a flat tire safely on the road? |
| Very confident | 2 | 100 % |
| Somewhat confident | 0 | 0 % |
| Not confident | 0 | 0 % |
| Would NEVER do it | 0 | 0 % |
| LIST OF POLLS |
Latest 10 stories
